Ped-Zone™ stop sign
Substantially increase drivers’ compliance rate!
The in-street Ped-Zone™ flexible stop sign is an an inexpensive tool to increase drivers’ compliance rate at stop sign controlled intersections.
Set up in the middle of the street, the sign greatly increases the visibility of stop signs and reminds drivers to comply to stop sign controlled intersections.
When struck by a vehicle, the Ped-Zone™ sign folds up on impact and then returns to its initial position.
Its unique asphalt anchoring system is designed for Canadian winters. With four anchors and a specially formulated epoxy resin, it features a very strong anchoring system that can be used for several years. It also provides for easy removal of the signs in the fall (if required) and easy reinstallation the following spring.
Technical information
Technical information
- Overall Height: 122 cm
- Width: 32.4 cm
- Thickness: 0.3 cm
- Fibreglass board
- Rubber / steel base with 4 holes
- Anchors for installation included (for concrete or asphalt). Bitu-LinkTM epoxy (for asphalt) not included
- Width of the Reflective Sheeting: 30.5 cm
- Height of the Reflective Sheeting : 94 cm
- Reflective Sheeting fixed on both sides
- Anti Graffiti Protection Film included
Options
- Available colours of the reflective sheeting: White, yellow, yellow-green, fluorescent yellow, red, blue and green
- Ability to display a custom message
- Ability to include a custom logo
Installation
Installation – Asphalt
Simply drill four holes (Diameter: ¾ inch, Depth: 4 inches), inject Bitu-Link™ epoxy, insert anchors and wait 24 hours until the epoxy has hardened. The sign is then fastened with four bolts. This fastening method, which is perfectly suited for asphalt pavement, allows for the signs to be removed each fall (if required) and easily reinstalled the following spring.
Installation – Concrete
Simply drill four holes (Diameter: ½ inch, Depth: 1 3/4 inch), insert drop-in anchors and hammer them with a punch. The sign is then fastened with four bolts. This fastening method, which is perfectly suited for concrete, allows for the signs to be removed each fall (if required) and easily reinstalled the following spring.